Leave these fields empty (spam trap):
You can leave this blank to post anonymously, or you can create a Tripcode by using the format Name#Password
[i]Italic Text[/i]
[b]Bold Text[/b]
[spoiler]Spoiler Text[/spoiler]
>Highlight/Quote Text
[pre]Preformatted & Monospace Text[/pre]
[super]Superset Text[/super]
[sub]Subset Text[/sub]
1. Numbered lists become ordered lists
* Bulleted lists become unordered lists



- Wed, 25 Sep 2019 19:23:27 EST 0KwU98Gf No.38757
File: 1569453807771.jpg -(138855B / 135.60KB, 850x400) Thumbnail displayed, click image for full size. A.C.B.
Lets get some cookbook recipes going.
Resources and tutorials for anything useful or fun.
Examples are: Tennis ball cannons, laser tripwires, smoke screens, paintbombs, harmless payback pranks, thermite, water cannons, flame throwers, systems, party tricks, things that go boom and make loud noises, How to survive and fight back... anything along those lines.
Dragon - Wed, 25 Sep 2019 19:33:02 EST 0KwU98Gf No.38758 Reply
Most fire bombs are simply gasoline filled bottles with a fuel
soaked rag in the mouth (the bottle's mouth, not yours). The original
Molotov cocktail, and still about the best, was a mixture of one part
gasoline and one part motor oil. The oil helps it to cling to what it
splatters on.
Some use one part roofing tar and one part gasoline. Fire bombs
have been found which were made by pouring melted wax into gasoline.

-------------Jolly Roger
Dragon - Wed, 25 Sep 2019 19:49:27 EST 0KwU98Gf No.38759 Reply
Thermite is nasty shit. Here is a good and easy way to make it. The first step is to get some iron-oxide (which is RUST!). Here is a good way to make large quantities in a short time:

Get a DC converter like the one used on a train set. Cut the connector off, separate the wires, and strip them both.

Now you need a jar of water with a tablespoon or so of sodium chloride (which is SALT!) added to it. This makes the water conductive.

Now insert both wires into the mixture (I am assuming you plugged the converter in...) and let them sit for five minutes. One of them will start bubbling more than the other. This is the POSITIVE(+) wire. If you do not do this test right, the final product will be the opposite (chemically) of rust, which is RUST ACID. You have no use for this here (although it IS useful!).

Anyway, put the nail tied to the positive wire into the jar. Now put the negative wire in the other end. Now let it sit overnight and in the morning scrape the rust off of the nail & repeat until you got a bunch of rust on the bottom of the glass. Be generous with your rust collection. If you are going through the trouble of making thermite, you might as well make a lot, right?

Now remove the excess water and pour the crusty solution onto a cookie sheet. Dry it in the sun for a few hours, or inside overnight. It should be an orange-brown color (although I have seen it in many different colors! Sometimes the color gets fucked up, what can I say... but it is still iron oxide!)

Crush the rust into a fine powder and heat it in a cast-iron pot until it is red. Now mix the pure iron oxide with pure aluminum filings which can be bought or filed down by hand from an aluminum tube or bar (bicycle). The ratio or iron oxide to aluminum is 8 grams to 3 grams.

Congrats! You have just made THERMITE! Now, to light it...

Thermite requires a LOT of heat (more than a blow torch!) to ignite. However, magnesium ribbon (which is sort of hard to find.. call around) will do the trick. It takes the heat from the burning magnesium to light the thermite.

Now when you see your victim's car, pour a fifty-cent sized pile onto his hood, stick the ribbon in it, and light the ribbon with the blow torch. Now chuckle as you watch it burn through the hood, the block, the axle, and the pavement. BE CAREFUL! The ideal mixtures can vaporize CARBON STEEL! Another idea is to use thermite to get into pay phone cash boxes.

Place thermite on the hood of a car, light it, and watch it burn all the way through the pavement!
Dragon - Wed, 25 Sep 2019 19:57:18 EST 0KwU98Gf No.38760 Reply
The easiest way to hot-wire cars by the Jolly Roger

Get in the car. Look under the dash. If it's enclosed, forget it unless you want to cut through it. If you do, do it near the ignition. Once you get behind or near the ignition look for two red wires. In older cars red was the standard color, if not, look for two matched pairs. When you find them, cross them and take off!
Doris Suffinghitch - Thu, 26 Sep 2019 13:04:22 EST Q+FxovWn No.38761 Reply
Anybody else learn any of that janky shit from phrack magazine like filling a garbage bag with oxygen and acetylene and rigging it to spark? The 80s were good to me, I used to get Phrack 0-1 day.
Edwin Ponderham - Thu, 26 Sep 2019 15:04:23 EST 76eCRGLb No.38762 Reply
>Now mix the pure iron oxide with pure aluminum filings which can be bought or filed down by hand from an aluminum tube or bar (bicycle)

lol this wouldn't work at all. You need aluminum powder. Not aluminum filings. There's a BIG difference between the two, and getting ahold of aluminum powder is not easy, because of how volatile it is and the fact that authorities know that it's an essential ingredient in a lot of explosives.
Rebecca Hottingworth - Sat, 28 Sep 2019 11:24:03 EST K2VE2yJq No.38764 Reply
Filing a bike frame for magnesium was also in an episode of MacGyver.
Simon Blythefield - Fri, 22 Nov 2019 12:26:39 EST 5hisCZiU No.38808 Reply
filing aluminum gets it pretty fine, not like shavings. what if you crushed or ground them afterwards? always wanted to try making this stuff.
Hamilton Cropperdale - Sat, 23 Nov 2019 15:53:14 EST YJ333EDr No.38813 Reply
Anarchists cookbook, the acid (lsd) recipe now makes sense after all these years of why it was there.

Report Post
Please be descriptive with report notes,
this helps staff resolve issues quicker.