Leave these fields empty (spam trap):
Name
You can leave this blank to post anonymously, or you can create a Tripcode by using the format Name#Password
Subject
Comment
[i]Italic Text[/i]
[b]Bold Text[/b]
[spoiler]Spoiler Text[/spoiler]
>Highlight/Quote Text
[pre]Preformatted & Monospace Text[/pre]
[super]Superset Text[/super]
[sub]Subset Text[/sub]
1. Numbered lists become ordered lists
* Bulleted lists become unordered lists
File

Sandwich


Need an RDA/RTA and maybe an inexpensive mod

View Thread Reply
- Tue, 31 Jan 2017 19:46:30 EST kV0/WkWx No.3264
File: 1485909990382.jpg -(556518B / 543.47KB, 1522x720) Thumbnail displayed, click image for full size. Need an RDA/RTA and maybe an inexpensive mod
Hey gang I've been using a Crown v1 and an Istick 100w (no temp) for quite a while. I have fucked with mech mods but they aren't worth the battery life. Can you guide me to a good topper on the list for when I get a high powered mod?
1 posts omitted. Click View Thread to read.
>>
Augustus Gudgeshaw - Wed, 01 Feb 2017 04:45:49 EST a3Dle/gJ No.3266 Reply
>>3264

I don't have any single coil RDAs, however I really enjoy the Goon RTA which has a plastic cap to block the airflow on the coil not in use, and the SJMY kayfun v5 clone though I've had problems with dry hits so I think I've been wicking it improperly.
>>
Sidney Sammlefodge - Fri, 24 Feb 2017 06:19:35 EST h8C8V8Cp No.3414 Reply
>>3264
I got both the narDA and hadaly clone. I recommend the NarDA over the hadaly. Both are great in terms of performance/flavor, but the hadaly has one of the most frustrating build decks and won't be able to handle any thicker wires or mildly complicated builds. The coil ends keep slipping out from the clamps. I don't know why they decided to design it like that. It's ridiculously stupid and impractical. The narDA is basically perfect if you like a slightly restricted draw, straightforward and effective design, and ballin ass flavor.
>>
Emma Mublingshaw - Fri, 24 Feb 2017 07:31:24 EST ZcCj6RnB No.3415 Reply
>>3264
Troll v2's work exceptionally well with a single coil

510 dry herb vape

View Thread Reply
- Thu, 26 Jan 2017 02:56:27 EST 3IbTZZFa No.3255
File: 1485417387667.png -(81416B / 79.51KB, 166x314) Thumbnail displayed, click image for full size. 510 dry herb vape
I'm looking for a dry herb vape atomizer with a 510 connection so that I can use it on my regular boxmod. Does anyone have suggestions?
Most of what I find when looking around are complete packages with battery and everything but I don't need that stuff.
>>
Betsy Blobblenare - Wed, 01 Feb 2017 21:40:16 EST XQo5qmu0 No.3269 Reply
there's no such thing as a 510 dry herb that actually works by vaporizing the cannabinoids

if you're getting something out of one it's smoke+vapor at best

debating between kangertech / e leaf

View Thread Reply
- Sat, 31 Dec 2016 21:45:58 EST ZvV8jdeg No.3212
File: 1483238758681.jpg -(61068B / 59.64KB, 800x1000) Thumbnail displayed, click image for full size. debating between kangertech / e leaf
debating between Kangertech and Eleaf ;
http://www.vaporauthority.com/products/genuine-eleaf-ismoka-istick-50w-box-mod-kit

http://www.ebay.com/itm/Kangertech-KANGER-Top-Box-Mini-w-Subox-75w-TC-USA-Seller-/252553992236?var=&hash=item3acd64182c:m:mSZaOC4crJqaWMFcU84eepA

What are you guy's thoughts / experiences with 50watt e cigs?
Is it better to splurge and buy an expensive one from the get go or should i go for the best deal?
are there any other brands i should look into?
5 posts and 1 images omitted. Click View Thread to read.
>>
Hedda Dettinglock - Wed, 08 Feb 2017 16:31:21 EST +JeWX3ef No.3288 Reply
1486589481890.jpg -(191220B / 186.74KB, 1200x800) Thumbnail displayed, click image for full size.
>>3287
Also forgot to mention I've gone through two Eleaf Picos. I ended up giving my white one to a friend and had threading issues with my silver one. The Kanger mods just feel like they are much higher quality. I am extremely happy with my Nano and can't wait for my 160 DRIPBOX tomorrow. I've never had an issue with leaking. Still, the Alien is one of the best on the market right now but I'd get the G-Priv Touch Screen if you have the money to spend. I'll probably get both it and the Alien as my next mods.
>>
Lillian Chirryman - Wed, 15 Feb 2017 18:03:38 EST wDjbBtVD No.3298 Reply
ive used kanger for a while, i recently stopped. Their products were always hit or miss, and 70% of the time their coils are shitty as well, i got a 220w mod he other day and its way better, shit even other mods ive had were way better and that wasnt saying much. I had a subox and it was pretty much just a total year of nonsense, coils wouldn't fire or wouldn't fire properly, menu would malfunction, sometimes wouldn't even fire at all for no reason (fault protection was shit and would go off even when nothing was wrong)

Clove E-juice

View Thread Reply
- Sat, 11 Feb 2017 09:50:49 EST dijlqcCw No.3291
File: 1486824649009.png -(532493B / 520.01KB, 846x1280) Thumbnail displayed, click image for full size. Clove E-juice
How do I make a Eugenol E-liquid with clove oil?
>>
Thomas Nenderforth - Sat, 11 Feb 2017 11:58:46 EST 6ussZKE6 No.3293 Reply
>>3291
Vaping oils is dangerous because when vaped they form substance that stick to your lungs leading to pneumonia. That being said, everything in moderation right? You could simply add a drop to your favorite juice and shake it, heat it on a warming pad or hot water for a few minutes. Oil is going to easily fall into solution in glycerin they're both very nonpolar.
>>
Thomas Nenderforth - Sat, 11 Feb 2017 12:04:28 EST 6ussZKE6 No.3294 Reply
>>3293
Scratch that I'm stupid, glycerin and glycol are polar. But I still find them able to mix a small amount of oil (read a couple drops) after heating and shaking the mixture.

Starting down a bad road?

View Thread Reply
- Tue, 08 Mar 2016 19:54:10 EST gstcbemm No.2107
File: 1457484850710.jpg -(175256B / 171.15KB, 910x700) Thumbnail displayed, click image for full size. Starting down a bad road?
Heyo. I've never smoked cigarettes (tried them tho) before, but I wanted to try an e-cig. I bought a blu plus xpress kit from a local gas station. I thought the cartridges were the lowest nicotine strength, but apparently they're 2.4mg/ml, which is quite high.

I've been enjoying the light stimulant effects and just chilling and vaping, makes me more social and makes music better, etc. It's been a few days and I'm almost done with the 2nd cartridge, so that's all that came with it.

I am about to go buy more, however, I looked up that nicotine strength and realized I could be setting myself up for addiction potential.

I don't really care too much if I can't vape, or if I left it at my place, or something. I also like the effects it gives me at the current strength-- I even think I'd be happy halving the effects. However, I dunno if the gas station sells anything weaker.

What do?
7 posts omitted. Click View Thread to read.
>>
Jack Grimfoot - Thu, 02 Feb 2017 12:35:53 EST MDCyqssE No.3271 Reply
You are exactly the kind of person people point to when they argue vaping should be banned. Don't set yourself up for an expensive addiction just because you like the flavor or some shit. You may even lead yourself to smoking. Finish what you've got and let it go would be my advice.
>>
Fuck Sandleladge - Fri, 10 Feb 2017 05:08:17 EST DnYtz/gI No.3289 Reply
I highly doubt you're still here, but this is to anyone similar.
Don't get into nicotine intentionally. It's incredibly anxiogenic both while dosed and at baseline. And it easily becomes unpleasant later on, when even getting a buzz can prove difficult. You still crave it even if it does nothing but make you feel bad.

I used it to get over opioid PAWS because it numbed my irritation while still leaving me functional. Which it worked well for. But it was really strange craving something I didn't even find pleasant afterwards.

You can vape just fine without it. There's plenty of flavors to use for fun. The feeling of inhaling vapor is still pleasant, though sadly lacking in the sensation of a harsh hit of nicotine.
I really like CBD for effects. Mixing my own from isolate powder/crystals. At least that's physically calming rather than just relieving.

vaping behaviour

View Thread Reply
- Tue, 07 Feb 2017 08:35:04 EST WjLrLMLm No.3283
File: 1486474504129.jpg -(48254B / 47.12KB, 653x193) Thumbnail displayed, click image for full size. vaping behaviour
when using e-cigarettes I tend to smoke almost nonstop, since it does not glow out like a normal cigarette. Is there no model which has some kind of timer that starts on the initial puff and then prevents smoking for xx minutes after vaping yy minutes? I think this would be a good way to get people off smoking.

Secondly I have an older iJust, pic related. I want to get me a new one but I would love to use the batteries I have, since they fit into my flashlight too. Does anybody know which model might fit? On the batteries is written 18650 3100mAh, 3,7V MH12210. Id be thankful for any hint.
>>
Beatrice Dindermire - Wed, 08 Feb 2017 00:08:19 EST Q0Bb0iK8 No.3284 Reply
Used to have a Smok X-Cube II mod, and it had a "puff limiter" where you could change the settings to limit the amount of puffs you take in a day.
>>
Beatrice Dindermire - Wed, 08 Feb 2017 00:10:52 EST Q0Bb0iK8 No.3285 Reply
Sorry for double post, but as for the batteries, any mod that says "18650" in regards to batteries would be compatible with what you have. Just check the item description, it's usually there.

nb

Do I suck at wicking all of the sudden?

View Thread Reply
- Sat, 04 Feb 2017 11:43:36 EST 1q3vXDaH No.3277
File: 1486226616959.jpg -(158493B / 154.78KB, 1000x1000) Thumbnail displayed, click image for full size. Do I suck at wicking all of the sudden?
Just a quick readout, the setup I'm running is a Sigelei 200W box with a Velocity RDA. I'm running 55.5W through it at 0.4ohms, and the build is dual parallel coils wrapped 8 times using 28awg Kanthal, and I have them stacked vertically because the RDA is a two-post setup, they're centered right in the middle of the RDA.

This has pretty much been my "old reliable" of sorts since I've sort of plateaued in my interest in rebuilding and whatnot, and I've had very few problems up until a few months ago. When I'm wicking them, I thread the cotton (organic non-bleached balls) through the center of the coils, I think I have these at 2.5mm diameter. I usually juice it up and let it soak for a few minutes and go at it and it's usually been fine. A few months back I noticed that the wick threaded through my top coil had developed a tendency to split apart in the middle, inside the coil, causing a burnt taste and frequent dry hits. This happened less often with the coil mounted on the bottom. When I'm removing my old wicks, they're practically falling right out and the middle of the wick is noticeably gone, the wick ends at the mouth of the coil; as if the cotton in the middle just burnt up and disappeared.

I tried finding some solutions elsewhere but I've had no luck, I'm changing my wicks twice a day at this point when for over a year I've never had this problem on the exact same build. I've tried using more cotton for a tighter hold, I've tried using less cotton to prevent it choking up and not distributing liquid, I've tried letting it soak for a half hour and I've even let it soak overnight. I've run down the wattage as low as 44W and still the same problem arises on a build I used to be able to run up to 120W on.

Do you guys have any idea at all what could be causing this? I've heard people say that it could be caused by some different brands of liquid but I've had it happen with pretty much all my usuals (although I notice it's more frequent with creamier, milky juices).

Any help is appreciated dudes
1 posts omitted. Click View Thread to read.
>>
Ian Crebberhork - Sun, 05 Feb 2017 04:56:22 EST E/4kK2FZ No.3279 Reply
Also how often do you rebuild the coils?
>>
George Pittworth - Sun, 05 Feb 2017 13:15:00 EST wvqan/Gc No.3280 Reply
>>3277
I had the same problem with long coils, i.e. larger diameter and with many wraps for high voltage setups on series mechanicals and triple-battery regulated. I found my solution in using spaced coils since those coils heat up more evenly and, while clean, don't get too hot in the center before the rest of the coil heats up. An easy way to make spaced coils is to wrap coils in parallel and then unscrew the coils from one another while still on the coiling rod, perhaps requiring a dummy wire on the rod since you're already wrapping parallel coils. Another method would be to wrap coils as usual and then stretch and compress the coils on the rod until evenly spaced but, again, difficult with already-parallel coils.
>>
Nigel Seckleham - Sun, 05 Feb 2017 19:54:39 EST HQLzMjPJ No.3281 Reply
>>3278
>>3279
I rebuild about once a month. I actually just tried another brand of cotton today and already ran into the same problem, so that tells me the problem is most likely on my end and not just the brand


>>3280
I'm gonna try this, thanks. I'll probably try and rebuild like I normally would one more time first, though, I have a hunch that maybe I've got a hotspot that I haven't noticed or something.

want to start dripping

View Thread Reply
- Sun, 07 Feb 2016 13:35:15 EST 17B1rumf No.1829
File: 1454870115498.png -(706084B / 689.54KB, 600x452) Thumbnail displayed, click image for full size. want to start dripping
Hi /vape/, first thread in this board. I come with some noob questions. I have a mechanical smok r80 TC (goes up to 80w and has temperature control).
Now, the questions:
-What's a good tank (?) to start
-Good coil material
-Frequency in his is recommended to change the coils and cotton

Also I'm in sort of a budget, so I don't know if that helps.

I want to start dripping mainly because I am looking to improve my flavor experience, not necessarily looking for the huge clouds (even thought I'm fine with having them), am I looking for the right thing here?

Enlighten me please
7 posts and 2 images omitted. Click View Thread to read.
>>
russian nigga - Sat, 04 Feb 2017 09:46:52 EST 2afDCyjq No.3274 Reply
Kennedy/Velocity/Goon/Twisted Messes/Unholy/Recoil/Magma/NarDA
Its an almost complete list of highly rated rdas i found across various forums, russian imageboard reviews and personal experience.
Google them and get yourself any you personally like or a high rated cheap clone from fasttech/ali. I'm not really sure you can import rda clones to us safely tho so check that by yourself.
Other thing you need to know is that currently all the bottom airflow rdas are leaking the liquid a bit. The other thing is that twisted messes rda is more of cloud chasing one and you wouldn't find a clone of it. Other ones are providing an amazing juice/clouds balance (not really sure about magma).

Pretty sure my english isn't excellent. Sorry for that.
>>
Charles Blepperwater - Sat, 04 Feb 2017 09:55:50 EST ZcCj6RnB No.3275 Reply
>>3274
Next to the goon, my two favorite rdas are the troll and doge. The troll is by far the easiest rda to build on ive ever seen
>>
russian nigga - Sat, 04 Feb 2017 10:27:36 EST 2afDCyjq No.3276 Reply
>>3275
>troll
Forgot to include in the list.
>easy to build on
Velocity deck?
>doge
Got almost no info about this one. How does it feel compared to goon?

Vaping weed

View Thread Reply
- Sat, 28 Jan 2017 09:40:19 EST yTgqYlyJ No.3258
File: 1485614419643.jpg -(32366B / 31.61KB, 394x331) Thumbnail displayed, click image for full size. Vaping weed
Hi guys, are there atomizers available for vaping weed ?
I own a ELEAF PICO 75W.
Does anyone here has this?
If so, please enlighten me
>>
William Samblecocke - Sun, 29 Jan 2017 08:56:34 EST O5vLi4m1 No.3261 Reply
>>3258
get some PEG400 and mix with BHO and your own flavours and you can use that in any tank you have. if ypu want to waste more money you can get ejmix or dbmmix pro.

i find that the dry herb atomizers are pretty shit
>>
Augustus Gudgeshaw - Wed, 01 Feb 2017 04:47:34 EST a3Dle/gJ No.3267 Reply
>>3258
That fried unit IndoorSmokers/Tokers dude had a review on the Black Sub-Herb which he seemed to like.

VAPE HATERS

View Thread Reply
- Tue, 27 Oct 2015 05:09:46 EST WADK1kPy No.738
File: 1445936986995.jpg -(177864B / 173.70KB, 650x525) Thumbnail displayed, click image for full size. VAPE HATERS
Now I am not talking about all the reasons listed in the image I am more reffereing to the online flaming of vapers. There seems to be a whole world of trendy peeps with vapes talking clouds and thinking they are superior of which I am not familiar at least over here in Europe. I find the dedicated vapers here to be pretty cool normal people who just want a smoking alternative.
What is this underclass culture that is bringing down the hate that I am not aware of?
4 posts omitted. Click View Thread to read.
>>
Qwerty !TJ9qoWuqvA - Wed, 28 Oct 2015 19:35:23 EST Ku+ml9SR No.804 Reply
We get it you fight for vapes
>>
Henry Gonnertid - Sat, 21 Jan 2017 15:28:03 EST 3hhmZ3uE No.3251 Reply
>>763
either way, someone is buying tobacco products for children
>>
Angus Geffinghall - Sat, 28 Jan 2017 14:17:54 EST VpDbgUHD No.3259 Reply
>>738
> I find the dedicated vapers here to be pretty cool normal people who just want a smoking alternative.

I'm in the US and that's what its like here, too. People just harp on vapers because of the only things they know about vaping are from obnoxious Youtube videos. They don't actually know anyone who vapes. I've literally never met a cloudbro IRL. All the people I know who vape are former smokers in there 20's and 30's who act no different now compared to when they smoked cigarettes.

1+ ohm, single spaced coil life

View Thread Reply
- Tue, 24 Jan 2017 08:20:01 EST ZcCj6RnB No.3252
File: 1485264001674.png -(379638B / 370.74KB, 800x800) Thumbnail displayed, click image for full size. 1+ ohm, single spaced coil life
When I started vaping I had all regulated devices, and was always told that dual coil, lowest ohms ya can get is the way to go. Well, after getting into mechs I realized that's not only just preference, its not really the best way to go with many mods. Anyone else still all about that 1+ ohm single coil life? The benefits I've found so far are that your batteries will last much longer, the vape is cooler, theres more flavor, you can put huge weird coils on and not worry about long ass ramp up, and its a lot easier to build.

Plus you can freak out ur sub ohm friends when you blow clouds at like 20 watts lol.
>>
Barnaby Crettingsat - Mon, 06 Feb 2017 06:12:59 EST fyH22pjN No.3282 Reply
>>3252
>Anyone else still all about that 1+ ohm single coil life?
Yes, I run a variety of setups but I have two 18350 mechanicals that I use with 1Ω single coils in tiny (read: Derringer-type) 22mm RDAs.

hand-me-downs-syndrome

View Thread Reply
- Sun, 08 Jan 2017 06:12:49 EST of3JH+NL No.3222
File: 1483873969708.jpg -(874362B / 853.87KB, 1836x3264) Thumbnail displayed, click image for full size. hand-me-downs-syndrome
My brother just gave me these earlier tonight and I wanted to know what type of vapes these are and how to turn them on my brother gave them with no charge so they currently are being juiced up. I know one is for dry herbs and one is for goo, but can I do resin out of these too?
>>
Banteel - Sun, 08 Jan 2017 06:58:55 EST kBdOeaMX No.3223 Reply
>>3222
The one on the right with the glass bubble looks like it might do concentrate. Though I don't know your pen's temperature control. If you do try it, I recommend the lowest voltage setting it has, like around 3.2 to 3.5 on the dial if it go that low.
>>
Banteel - Sun, 08 Jan 2017 07:08:54 EST kBdOeaMX No.3224 Reply
>>3223
Before you try it. I do recommend you go to either Source Vapes website or some other known Concentrate Vape pen site and look at their atomizers to make sure that the atomizer on your pen is the same or at least very similar to the standard concentrate pens being sold.
If it's the same atomizer as any of these pens known for smoking concentrate then you may have a good chance at successfully smoking it with concentrate (bho).

The white pen on the left looks like a normal vape pen for PG/VG. I could be wrong. It may be a goo pen as you say for bho mixed with a liquid. Actually upon closer look in the photo it seems to have brown sludge inside the white pen, so it's likely bho liquid goop.

I'd stick with the glass bubble pen on the right for smoking hard bho.
>>
Clara Lightson - Sat, 21 Jan 2017 01:08:53 EST l52d8KPt No.3250 Reply
White one is a Snoop Dogg g pen with the weed attachment. Press the button 5 times quickly to turn it on.

Smell

View Thread Reply
- Wed, 18 Jan 2017 20:21:01 EST zLDl2Gjz No.3248
File: 1484788861305.png -(396593B / 387.30KB, 627x450) Thumbnail displayed, click image for full size. Smell
I just bought an Arizer air and a smoke buddy and I was wondering if the smell lingers, like after smoking cigarrettes, thankfully nobody cares about the smell in my building but I don't want to weed smell to stay on the walls, furniture or whatever else.
>>
Reuben Munkinhood - Thu, 19 Jan 2017 06:59:57 EST yVcJ0rg7 No.3249 Reply
>>3248
Nah, The smell from my buddah only stays for around an hour after I've vaped. No lingering smells when I quit for a couple months either.

Maximum Stealth Vape

View Thread Reply
- Sat, 14 Jan 2017 22:22:29 EST Nz9y9cS8 No.3238
File: 1484450549462.jpg -(174395B / 170.31KB, 600x768) Thumbnail displayed, click image for full size. Maximum Stealth Vape
Hey /vape/,

I'm likely buying an entire vape kit this Monday, and I want to make it maximum stealth so I can smoke in empty places in campus instead of having to walk about 3 kilometers outside campus to smoke.

So far my plans are to get:

  • a Kayfun atomizer (not sure which, being honest)
  • iStick Pico
  • A PG flavor that doesn't produce a lot of vapor or smell, but that has a good taste

I still want to get a huge buzz from the nicotine but I want it to be decently compact, that doesn't make a huge "pop" noise and keep the vapor to a minimum, though, so I'm not sure exactly what I should get that still doesn't sacrifice the taste and doesn't smell much.

Thx in advance
3 posts omitted. Click View Thread to read.
>>
Albert Bogglenet - Mon, 16 Jan 2017 04:14:51 EST WMl2mps6 No.3243 Reply
>>3242
>Secondly iirc max pg is for people that want BIGGER vape clouds.

This is wrong. High VG is smoother and makes bigger clouds.
>>
Wesley Wiblingnure - Tue, 17 Jan 2017 13:37:06 EST lSA1hJBA No.3245 Reply
>>3238
How are you planning to get a massive buzz from small amounts of vapor? A high nicotine concentration?

Report Post
Reason
Note
Please be descriptive with report notes,
this helps staff resolve issues quicker.