Leave these fields empty (spam trap):
You can leave this blank to post anonymously, or you can create a Tripcode by using the format Name#Password
[i]Italic Text[/i]
[b]Bold Text[/b]
[spoiler]Spoiler Text[/spoiler]
>Highlight/Quote Text
[pre]Preformatted & Monospace Text[/pre]
[super]Superset Text[/super]
[sub]Subset Text[/sub]
1. Numbered lists become ordered lists
* Bulleted lists become unordered lists


best boxmod for vaping wax/concentrates??

View Thread Reply
- Wed, 30 Nov 2016 21:49:11 EST FeKr/L2U No.3154
File: 1480560551677.jpg -(14888B / 14.54KB, 100x106) Thumbnail displayed, click image for full size. best boxmod for vaping wax/concentrates??
is there any particular pen or boxmod I need to reach a high enough temp to vape concentrates properly or will any decent pen do? Also I have no idea what attachments are what on vapes so any help is appreciated.
1 posts omitted. Click View Thread to read.
Ωµæ§†♪α¡ⁿ))) !QSTRNGiKc6 - Mon, 26 Dec 2016 21:23:57 EST /tUc0PFx No.3205 Reply
1482805437699.jpg -(94191B / 91.98KB, 960x716) Thumbnail displayed, click image for full size.
I just got an istick power nano with a ceramic tank, what wattage do you think I should do?
this is my first time getting into this, I've read to stay between 4-7 something but I find at8-10 is where I get the best hits, because lower than that it doesn't get hot enough fast enough I guess.
Am I wasting my wax because I feel like every hit should be hard hitting like any other dab, even though I am vaping.
I've gotten a few really great hits out of it that really got me good but idk what I'm doing.
My box goes from 1-40 watts, voltage seems to adjust with watts.
has temperature control modes but those are for coils made out of specific material not including ceramic.
Barnaby Pobbernark - Wed, 04 Jan 2017 07:04:54 EST WMl2mps6 No.3216 Reply
I doubt any of the coils for your tank can be temp controlled.

I wouldn't worry about your wattage too much. There's a lot of variance with these atomizers. You're not cranking it up to anything crazy, just go with what works for you.

You should experiment with turning down the power a bit though and see if you still get as high. Most of these atomizer aren't going to hit anything like a real rig. Turning them up may make them seem like they are hitting harder, but it mostly due to the hotter air burning your throat more.
Diaboli - Mon, 09 Jan 2017 11:45:42 EST QxIlzRXL No.3227 Reply

Now I haven't used my vape on any concentrates yet but I do have something I can say about your comment.

When I vape if you begin to inhale quickly after you begin to hit your setup you can avoid the vapor getting hot and burning your throat. Reults; longer hits bigger clouds. That being said I would think you would want to put your wattage up as high as possible for concentrates to get the actual burn required for dabs.

I don't know the info but I would assume you could literally take the temp it takes to vaporize a dab in a dab rig and cal ulatewhat voltage it is that leads to an equivalent heat then extrapolate the wattage based of that voltage. Or ofc go temp controlled =p

how long should a coil last?

View Thread Reply
- Sun, 08 Jan 2017 03:09:31 EST jh1YrbcS No.3220
File: 1483862971698.jpg -(62391B / 60.93KB, 504x688) Thumbnail displayed, click image for full size. how long should a coil last?
i have a kangertech topbox mini pro.
it came w 3 coils: stainless steel, nickel, and titanium.
whats the difference between all of them?
how long should a coil last until you should change it?
mine goes up to 75w, i keep it in the 40-60 range.
Matilda Mucklebanks - Sun, 08 Jan 2017 21:45:31 EST ZcCj6RnB No.3225 Reply
Depending on your juice and how much you vape, anywhere between a week to a month-ish. You can use any of those coils on standard vw mode, and if your box has settings for temperature control (make sure it matches the metal the coil is made of) you can run it that way.
Diaboli - Mon, 09 Jan 2017 11:32:40 EST QxIlzRXL No.3226 Reply
Pretty much what Matilda said, except I've had some coils burn out in days,

Currently I use a smok tank with an octo coil, if I don't let the juice level get low so the coil can't reabsorb juice quickly and the coil fires dry my coil will last well over a month.

The difference in coil metals is used only for temp control box mods. Your kangertech doesn't even have voltage settings iirc but has the standard wattage settings so you pretty much will use the steel coils only

Casually smoking 8ths in a Source Orb 3

View Thread Reply
- Sat, 27 Aug 2016 18:05:31 EST J52GtMM0 No.2892
File: 1472335531172.jpg -(2189957B / 2.09MB, 3264x2448) Thumbnail displayed, click image for full size. Casually smoking 8ths in a Source Orb 3
For the casual shatter smoker:
This is for Source Orb 3 & 4 vape pens with the purchase of Single Coil Quartz Atomizers.
Take 2 to 3g of wax concentrate a month.
Roll each g as needed into a reasonable line, with parchment paper, apx 2 inches long.
Cut the g equally into 8 pieces by cutting halve, then cutting the halves and again halving all halves.
Place one 8th into the pen and casually smoke it for 2 days.

Recap. Minimum 2g wax cut into 8ths, smoke 1 8th every 2 days = 1g is 16 days = 2g min a month.

You're welcome for the moderation technique.
3 posts and 1 images omitted. Click View Thread to read.
Jack Giddleman - Fri, 09 Sep 2016 03:01:28 EST WMl2mps6 No.2917 Reply
If you want to go the RDA route I've also seen people using ceramic or quartz "wicks" for their hash builds. I haven't tried this myself. but it seems to work fairly well.
Fanny Greenridge - Thu, 06 Oct 2016 04:11:08 EST SR2A4tQT No.3002 Reply
1475741468892.jpg -(1613135B / 1.54MB, 1944x2592) Thumbnail displayed, click image for full size.
youre doing it wrong. PUTTING A WHOLE 2 G IN RUINS THE FLAVOR/TERPS. dont do this. get a knockoff atmos kiln on ebay for $8.00. pic slightly related, an altus t1 cvu mod. perfect for live resin co2 oil.
Banteel - Sun, 08 Jan 2017 04:59:53 EST kBdOeaMX No.3221 Reply
No, it's not normal. It's a concentrate vapor pen.
I'm sure you understood the process I explained about cutting it up. So I will explain the part about using, loading, and smoking the pen. Again, this is related to the Source Vapes: Source Orb 3 pen. You can get the newer Source Orb 4 too, though again I recommend the Single Coil for making your 8th last longer. I have not tested the SO4, only the SO3.

Get your parchment paper full of 8ths from the freezer.
Pick up one 8th and place it into the atomizer gently push it down nicely onto the top of the single coil inside so it is only touching the coil. Do NOT force it down or pack it into the atomizer. When you press the button the coil will melt it down all on it's own.
Prime the wax by pressing the button for a few seconds a couple of times until the
concentrate melts down around the single coil.
At this point, you can place the top onto your pen and you are now ready to start smoking.
At a casual rate, I find my 8th lasts me 2 days. Then I repeate the process, get another 8th from the freezer and drop it in. These single coil atomizers will last 6-8 weeks.


I am interested in the SO4 with a Coil-less atomizer to see if I can produce the same moderation.


View Thread Reply
- Sat, 01 Oct 2016 05:51:11 EST PQGD6AOT No.2976
File: 1475315471427.jpg -(799129B / 780.40KB, 1520x2688) Thumbnail displayed, click image for full size. COIL 4 RDA
I got 26g kanthal. I want a coil setup that's good for a long inhale and big clouds on exhale.

Currently sticking to 4/5 wraps on an average sized computer screwdriver. But it's burning out about 60W and doesn't seem to last too long.

Any advice?
5 posts and 1 images omitted. Click View Thread to read.
Archie Mummlehat - Wed, 14 Dec 2016 00:51:25 EST 64TS59Yz No.3192 Reply
wtf 8 wrap parallels? the whole point of parallels is to produce a ton of clouds, im pretty sure thats gonna be a weak as hit bro
Martin Grimstock - Tue, 27 Dec 2016 00:48:01 EST DnYtz/gI No.3207 Reply
The whole point of parallels is to increase the surface area for the resistance, which in turn produces clouds at the expense of ramp up time.
Just like with espresso versus drip brew for coffee, you can go for weaker just fine. Strength isn't the whole point at all. It's about method. They both allow for more strength without ruining flavor, but weaker strength still holds better flavor anyway.

Seeing as OP was burning out at 4/5 standard wraps, only doubling the surface area for similar resistance is a good choice. Going for more wraps wouldn't solve a burning issue at all.
Though it's mostly wicking that causes burning in the first place.

But what I'm curious about is the "doesn't seem to last too long" part. Coils last practically forever as long as you torch and clean remains off when changing wicks. Dry hits or overheating flavors can ruin wicks easily, but shouldn't kill coils at all.
Shitting Blashwater - Thu, 05 Jan 2017 05:30:14 EST ZcCj6RnB No.3218 Reply
twist up that kanthal, wrap it like, 6-10 times.

just trust me. its not all about that super low ohms bro tho fo sho

need a new tank

View Thread Reply
- Mon, 05 Dec 2016 14:30:59 EST YxIuFCKs No.3165
File: 1480966259617.jpg -(63361B / 61.88KB, 800x800) Thumbnail displayed, click image for full size. need a new tank
I own an Istick Pico 30w with a Melo III minitank which blows chunks because if you tap on it wrong you get a 510 connection issue

I want a new tank for christmas and I am willing to spend 50 dollars on it.

any recommendations?
3 posts omitted. Click View Thread to read.
Priscilla Nushlock - Tue, 20 Dec 2016 23:58:56 EST 6aIKTA1T No.3198 Reply
Wont work with the Pico, its 24mm+ and the battery cap on the pico prevents anything over 22mm from screwing on
Martin Grimstock - Tue, 27 Dec 2016 00:51:53 EST DnYtz/gI No.3208 Reply
I can get 23mm on there easily without scratching anything. But that's the limit.
Betsy Briffingbone - Mon, 02 Jan 2017 09:17:08 EST xgIhog3o No.3214 Reply
I love the istick pico I have dropped a hundred times, dropped it water... twice, had it fire endlessly in my bag and the damn thing just keeps going. Most durable box mod I ever had... and its dirt cheap.

I Use a single coil Magma Paradigm RDA and occasionally a kangertech sub tank


View Thread Reply
- Sun, 04 Dec 2016 03:20:08 EST l1OwmnjP No.3159
File: 1480839608257.png -(119221B / 116.43KB, 1330x1595) Thumbnail displayed, click image for full size. tfw
2 posts omitted. Click View Thread to read.
George Sattingbanks - Wed, 28 Dec 2016 00:52:57 EST l1OwmnjP No.3209 Reply
It was estimated to be delivered between the 7th and the 28th. Please deliver.
Augustus Snodwater - Fri, 30 Dec 2016 12:10:17 EST FeKr/L2U No.3210 Reply
1483117817385.png -(171867B / 167.84KB, 312x300) Thumbnail displayed, click image for full size.
>buying from chinese websites

you get what you deserve

Matilda Dettingwater - Sat, 31 Dec 2016 01:15:42 EST VGHNB/MY No.3211 Reply
I got a top air flow for my griffin 22 from fasttech. It took over two months because of back order or some shit. It was worth it I suppose but never again from China. Too fucking long.

Best Strawberry Milk juices!

View Thread Reply
- Wed, 21 Dec 2016 19:28:48 EST PC9ZwzAt No.3199
File: 1482366528413.jpg -(42497B / 41.50KB, 512x512) Thumbnail displayed, click image for full size. Best Strawberry Milk juices!
Hello everyone. I'm a Strawberry Milk fanatic...ever since I had my first taste I've been all about it. Therefore, in case you guys were interested in all the one's I've tried so far, I've started writing reviews on them.

If you guys have any other good suggestions, please let me know. I'm always down to try something new.

Suicide Bunny - Mother's Milk
Good. I can take it or leave it, but there are much better out there. It’s not that I don’t like it, but it has a weird taste to it, like I can taste the strawberry, but the other flavors in it just don’t taste how I’d expect an artificially flavored milk vape juice. The price for this seemed high for something not as good as it should have been.

Boosted - Boosted
I liked it more than some of the others. Nothing special. I do wish the strawberry was stronger, but if you like a strawberry milkshake with more milkshake than strawberry, this one is for you.

Giant Vapor - Mom's Milk
I can’t remember where I read it, but apparently this is a pretty spot on clone of Mother’s Milk by Suicide Bunny. I think it was a little better though!

Cuttwood - Unicorn Milk
It’s very good. It could be part of the hype about Cuttwood, but I certainly liked it. The price was high, and while worth it, it’s not something I would vape every day due to the price. There’s not much to say other than it’s strawberry milk, very balanced and simply tasty. Not too much sugar which seems to be a problem with most of these. Nicotine quality seemed good, some of the better I’d say, but again that’s probably why I had to pay $20 for a 30ml

Vapor In A Bottle - Strawberry Milk
This one is top tier, which surprised me because of how inexpensive it was. I didn’t expect much but was really happy I tried it, I almost didn’t because of the low price. The milk part tastes really authentic but there’s more to it than just strawberry and milk. I can taste the background notes of graham crackers, maybe some sort of cream, I can’t tell, but whatever it is, I like it. The strawberries are just as authentic tasting as everything else and are a perfect amount compared to the milk/cream. Balanced AF. Out of all of these not only was it on par (maybe better) with Cuttwood – Unicorn Milk, but it was less than half the price. The nicotine was just as high quality as well.

One Hit Wonder - The Milk Man
Sweetness overload. I don’t like it. The packaging was way cooler than the actual juice. It’s almost like if they just took the sweetener out it would taste ok, because I can taste a slight good flavor covered up by sweetener. Even if this juice wasn’t expensive as hell, I’d still never vape it again.

Blue Dot Vapor - Moo Fields
Comment too long. Click here to view the full text.
David Pebberwater - Sun, 27 May 2018 21:09:32 EST RH1ebznk No.3997 Reply
1527469772129.jpg -(33215B / 32.44KB, 500x500) Thumbnail displayed, click image for full size.

Ohm resistance

View Thread Reply
- Thu, 24 Nov 2016 15:28:15 EST VATwbD+/ No.3128
File: 1480019295603.png -(148200B / 144.73KB, 790x720) Thumbnail displayed, click image for full size. Ohm resistance
Okay so I've tried looking up explanations on Ohm's and initial ohm resistance and things like that, but nothing really explains it clearly to me. Could someone explain it simply to me here?
3 posts omitted. Click View Thread to read.
Fucking Pannertod - Sun, 11 Dec 2016 17:02:55 EST THrDv7yU No.3186 Reply
My guess is initial resistance is the resistance when the coil is cold. I don't know what vapes use for coils but the filament in a lightbulb increases resistance as it gets hotter. This allows the lightbulb to heat up quickly but reduce power as it gets to the right temperature.

.2 ohms just means .2 ohms. Ohms is the unit of measurement for resistance. So if you put 1 volt across a .2 ohm load you get 1/0.2 amps. So 5 amps. 5 amps * 1 volt = 5 watts.
George Closhshaw - Sun, 11 Dec 2016 17:28:09 EST DnYtz/gI No.3187 Reply
Regulated mods generally regulate by watts instead. Throwing more volts at it as it gets hotter, making it even hotter. Or reducing watts as it reaches a goal resistance for temperature.

Mechs, bypass, and voltage modes don't do this.
Wesley Gummlemin - Mon, 19 Dec 2016 21:20:50 EST WMl2mps6 No.3197 Reply
That would be correct.

Temperature sensitive wires increase in resistance as they heat up. Temperature controlled mods use this change in resistance to determine the coil temp.

Suggestion on Pairing

View Thread Reply
- Tue, 13 Dec 2016 10:21:09 EST Gn93Tjuu No.3189
File: 1481642469025.jpg -(47959B / 46.83KB, 184x217) Thumbnail displayed, click image for full size. Suggestion on Pairing
Can anyone recommend a good regulated box to go with my TFV8? I also run an X1 RDA on it for dabbing so to be able to swap between presets would be nice. I was considering the XCUBE Ultra as well; any other suggestions?

Favorite Youtube reviewers

View Thread Reply
- Fri, 25 Nov 2016 20:01:50 EST VpDbgUHD No.3141
File: 1480122110447.jpg -(127278B / 124.29KB, 1920x1080) Thumbnail displayed, click image for full size. Favorite Youtube reviewers
Post 'em

pic related. I love this jolly african-american so much.
1 posts and 1 images omitted. Click View Thread to read.
Alice Billingspear - Sun, 11 Dec 2016 15:13:34 EST x3Iu5uge No.3185 Reply
1481487214662.jpg -(87394B / 85.35KB, 1920x1080) Thumbnail displayed, click image for full size.
So does this guy. And a good majority of the rest of the YouTube reviewers. How many dicks they like and where doesn't change their opinion...
Ernest Bubblelig - Sun, 11 Dec 2016 20:20:47 EST tKCCrqyF No.3188 Reply
EpicHerbReviews/IndoorSmokers is the only one ive ever really liked

Stopped smoking, now I want to make mass clouds huehuehue.

View Thread Reply
- Fri, 23 Sep 2016 23:55:17 EST VaQF7wej No.2958
File: 1474689317226.png -(536008B / 523.45KB, 765x651) Thumbnail displayed, click image for full size. Stopped smoking, now I want to make mass clouds huehuehue.
Ok guys, I've been vaping for three months now. My setup is a Wizmek RX200 and a VCST tank. I quit smoking and I'm vaping 0 nic juice, but I'm starting to get into cloud throwing. How can I set up my shit right now to get supersized clouds and maximum flavor? Call me a faggot if you want, but my smoking cessation tool became a hobby and I want to get stupid with it. Also I'm drunk as shit so bear with me.
4 posts and 1 images omitted. Click View Thread to read.
Thomas Clonnerstat - Fri, 25 Nov 2016 12:29:35 EST hcFD+cDs No.3139 Reply
not sheriff serious. the uwell crown gets expensive quick if you have to keep buying coils
Drivel_ - Sun, 27 Nov 2016 01:17:48 EST XHDLvHXK No.3146 Reply
It's all about sub ohm builds, good wick and a good mod to burn it all properly. Youtube has the best reviews
research and learn about Ohm's Law
Hugh Tillingshit - Sat, 03 Dec 2016 10:13:40 EST PrZTe38f No.3157 Reply
Blowing big ass clouds is fun but keep in mind you will likely get a bit of shit when doing so in public (not saying it's justified, but that tends to be the way it is around where I am at least), it will fog the shit out of whatever indoor space you probably use it in (which isn't necessarily bad, although it can be detrimental to computers and such from the residue left overtime), and I'd say try to have a way to go back to more modest amounts if you don't like it after a while.

As far as a nice atty, if you can build and know ohms law and practice the safety rules in terms of vaping, an RDA is probably the best bet, although there are some really nice sub ohm tanks out there as well. I've heard good thing about the Goon RDA, but more than that I cannot really say. I'd advise you to check out youtube and some other reviews on a variety of rdas and read up on building in general if you haven't gotten into that already. If you still want to deal with prebuilt coils I'd say the Cloud Beast (although I heard some people had issues, it's still regarded as pretty nice) and maybe some other sub-ohm tanks although I'm a bit behind with the latest & greatest (I remember the Uwell Crown 1 getting great reviews, Herakles, Arctic, & Starre Freemax tanks being the hot new things, some newer than others, last I looked into new tanks).
How much volume are you talking? I've used Uwell Crowns, and even a few slightly older sub ohm tanks and they can fog a room up pretty quickly, of course with an RDA you have the option to make a wide variety of builds, more than I'm sure you can with the RBA deck for the crown.

I've heard good things about the TFV8 but also that it has some leak issues (I don't own one so I can't personally attest to this) but I heard it does live up to it's namesake. Coils, unless you do a rebuildable deck again are going to cost a bit in the long run, same with the Crown and most sub ohm tanks. Still cheaper than cigarettes though I feel.

Another "Help me pick an atomizer" thread

View Thread Reply
- Sat, 03 Sep 2016 11:56:17 EST aWW+XxU3 No.2897
File: 1472918177286.jpg -(2223040B / 2.12MB, 2610x4640) Thumbnail displayed, click image for full size. Another "Help me pick an atomizer" thread
I've been using an iTaste MVP 3 with a Nautilus mini for over a year I recon, and now I'm looking for an upgrade.
I don't know if I want to get into RBA's since at first glance it seems a bit too fiddly but I could be convinced if the payoff is worth it. I'd also like a tank that holds at least 3ml. In general, how often would I need to replace the coil of an RBA?

The MVP 3 only goes up to 30w so I might also need something a bit stronger. I use the 1.6ohm coils and run it at 13.5w which equals 5.3v.
15 posts and 1 images omitted. Click View Thread to read.
Nell Blacklemodging - Sat, 05 Nov 2016 00:07:16 EST dOwLQDO3 No.3082 Reply
I bought a cleito as my first ever atomizer and holy shit do the replacement coils suck ass. literally 50% just taste like burnt rubber and that for $5 a pop WTF.

I bought the cleito RTA kit to remedy it and i've fallen in love with making my own coils/wicks.Whats a good RTA? The cleito one kinda sucks dick because it is nearly impossible to disassemble.
Hugh Tillingshit - Sat, 03 Dec 2016 09:59:56 EST PrZTe38f No.3156 Reply
1480777196541.jpg -(86023B / 84.01KB, 1080x1080) Thumbnail displayed, click image for full size.
Check out the Alien 220w by Smok for a reasonably priced, well functioning device. I had a long post written detailing the features but it closed and I lost it. Basically, it's affordable online, small size, updateable firmware, tons of information on the screen, & from what I've heard the biggest con is that some people experienced paint chips although I haven't had anything of the sort so far.

I'd avoid the newer IPV8 until they work out whatever bugs they may have with it as well as Kangertech products as they tend to IME be unreliable and a bit expensive for what they provide. SIgelei made some solid mods but they overstated the maximum wattage for the Fuchai 213's ( I think it caps out at 155w ), this kind of disappointed me since the 150w and 150w tc were great mods (still are imo). I heard some people had 510 issues with the Reuleaux but I think the newest models worked that out and I see so many people use it I can't in good conscious write it off as a bad mod, it was the one I chose between when buying the Alien, but the price of the Alien kit, the size, and fact that I don't see myself needing a 3x18650 mod is why I didn't get it (I'd still take one though, I can't knock it at all from what limited use I had with one). At the end of the day though it came down to money and size for me.

Check out some reviews and forums and see for yourself I guess is the best thing I can say. Both the RX200s & 2/3 are highly regarded as far as WIsmec mods and I have heard great things about the Alien as well (and my personal experience with it has been great so far).

As far as the cuboid I would wait to see what the new one is going to be like, as the old one had 510 issues and a few other one's I can't remember off hand although it is also a very popular mod (I'd say spend the extra 10$ or so and get an Alien over it, but that's just me).

Hash Cartridge

View Thread Reply
- Thu, 29 Sep 2016 19:42:37 EST Lf9P6DO1 No.2968
File: 1475192557384.jpg -(151592B / 148.04KB, 504x642) Thumbnail displayed, click image for full size. Hash Cartridge
So i have a snowolf 200w (v2) and i dont know much about adjusting volts or ohms. Im getiing a 500mg hash VAPORX cartridge and i was wondering what the optimum setting on the snow would be?

Also how many hits/how strong is 500ml, like compared to a gram of wax, how many hits does it take to equal a regular sized dab? and how many dabs per cartridge are in there?
thanks guys.
Phyllis Bungold - Sun, 27 Nov 2016 13:16:08 EST hcFD+cDs No.3147 Reply
if it's an ego cartridge get an ego 510 adapter first otherwise you'll short the cart and probably break it
Hannah Bicklehag - Mon, 28 Nov 2016 04:15:53 EST z1tRJCpe No.3148 Reply
Yes, start with finding an adapter. Then just work your way up from the lowest setting. I believe it's 5W for the Snow Wolf.

Entry level vape for weed smoker

View Thread Reply
- Wed, 26 Oct 2016 23:20:29 EST Eh304woX No.3055
File: 1477538429412.png -(543942B / 531.19KB, 700x2430) Thumbnail displayed, click image for full size. Entry level vape for weed smoker
So, I've only smoked on a vaporizer twice I believe, once in really cool vape, owned by a friend of one of my friends and the other time it was a e-cigarette thing I bought at the nearby tobacco shop for something like 5 euros.
The last time was something like one year ago, now I'm interested in a Vape with only one purpose: smoking weed.
I would like to know which vaporizers are good for this purpose? I saw that it's important that it doesn't burn the weed and things like that.
I'm not really interested in ripping the fattest clouds and stuff like that, I'd only like to be able to smoke at home, work or university without having problems about the scent of burning cannabis or the social stigma related to it.
Do you have any suggestions for portable, dry herbs vaporizers?
I'm looking for the cheapest option, since I'll only use it for smoking weed, but I'd love to hear your suggestions.
4 posts omitted. Click View Thread to read.
Hugh Chobbleham - Tue, 22 Nov 2016 03:11:27 EST ru6Xaj7/ No.3120 Reply
I like my launch box but a lot of people find them finicky. I think you need a finishing grinder to really make it work. You just have to get used to the different feeling of vaping and after that smoking weed feelings like a waste. You get way more flavor out of herbal vaporizers and it lasts longer (you can make edibles from vaped weed too).
I have a Pax 2 which is less finicky (don't bother with the Pax 3, it doesn't offer that much over the 2), though it also works best with a very fine grind like from a finishing grinder, The Crafty is considered to be the best portable by a lot of people, and the Firefly 2 is also well liked. These are all high end, around $300, the MFLB with finishing grinder is ~$160. The Flowermate is alright I think, if you want something cheap (<$100).
Hugh Chobbleham - Tue, 22 Nov 2016 03:13:55 EST ru6Xaj7/ No.3121 Reply
In terms of stealth the launch box blows the other ones out of the water. I would not suggest the Pax 2 because it kind of makes the room smell for ~20 minutes, but even with that the smell doesn't stick to you like smoking at all. It sounds like an launch box is the best fit for you but that's just my opinion. The Grasshopper is another stealthy vaporizer (it just looks like a pen).
William Boddlekatch - Fri, 25 Nov 2016 13:12:47 EST l+4S+Jfr No.3140 Reply
I just got an arizer air the other day and it's blown my mind holy shit this is the future of weed. Not only does it get you high af, it's also super efficient and you can use abv to get high AGAIN.

I've never tried any other vapes though so take it with a grain of salt.

Report Post
Please be descriptive with report notes,
this helps staff resolve issues quicker.