Leave these fields empty (spam trap):
You can leave this blank to post anonymously, or you can create a Tripcode by using the format Name#Password
[i]Italic Text[/i]
[b]Bold Text[/b]
[spoiler]Spoiler Text[/spoiler]
>Highlight/Quote Text
[pre]Preformatted & Monospace Text[/pre]
[super]Superset Text[/super]
[sub]Subset Text[/sub]
1. Numbered lists become ordered lists
* Bulleted lists become unordered lists



View Thread Reply
- Sun, 15 May 2016 11:04:03 EST tl6uQ4fZ No.2466
File: 1463324643572.jpg -(64527B / 63.01KB, 960x540) Thumbnail displayed, click image for full size. SHATTER
Gonna go to vape store and get my Sigelei 150W a new tank. Was thinking of turning this thing into a vape for wax. Whats the process on that? I don't know much and wouldn't know how to ask the employees (one is a decent friend where I'm going). Shit I'm reading says to get an RDA and then use ceramic coils and to apply the dab on there and hit it like I just dripped. Is this right?
Alice Nonningfuck - Mon, 16 May 2016 12:50:50 EST 6kJKS1HH No.2473 Reply
There's a lot of methods to dab with an e-cig. My preferred method at one time was to use a dual coil set-up in an RDA, nothing fancy, just 7 wraps of 24 gauge kanthal around a 3mm bit. Then I would wick with cotton like I was going to use it for e-juice, and drip 0mg e-liquid, get it good and soaked, then vape on it until it starts to dry the wick again. At this point, you're ready for your concentrate, just apply it to the coils, I usually take a standard sized dab, and split it between coils (or you could just run a single coil set-up). And then lightly tap the fire button, and melt it in gently, till its barely smoking (try not to let it smoke, ya don't wanna waste it). Then put the top cap back on, and hit it. You'll get more reclaim with this than other methods, like it condenses on the inside of the top cap, and the bottom of the juice well... Now, there's much better methods out there these days, like using ceramic wick, and there's ways of using stainless steel mesh as wick for the coil. My current method is a stovetop coil made from 22 or 24 gauge kanthal, with a metal pipe screen wrapped tightly around it, so it doesn't short with the deck of the RDA, and I run it on super low wattage (like 30-40, you could go even lower). I use it on a Hannya postless RDA, and it works great, it's basically an e-nail. I just take off the top cap, make sure the coil is cool, then smear it with dabs, pop on the topcap, and toke away! Usuall 1-2 good hits is what I can get from that. If you use my first method with the cotton wick, you can get 3-4 hits, if you put more e-liquid on top after the first couple hits. There's tons of guides and youtube videos. https://www.youtube.com/watch?v=qetJiugIzOU

And here's another link or two. This is a similar method to mine. https://www.youtube.com/watch?v=Aji2ZrbrZPs

If you can afford it, this is one of, if not the best cartomizers on the market today. It can hold a gram of concentrate, and you don't need to change the coils.

There's also the option of making an e-liquid with some concentrate dissolved in it, so you just use it like any normal juice, you can drip it, or put it in a tank.
Alice Nonningfuck - Mon, 16 May 2016 13:03:05 EST 6kJKS1HH No.2474 Reply
Companies to avoid are
Greenlight Vapes H-Enail/Dabbie
Grenco Science(G-pen)
Source Vapes
Gentlemen Vapes:while the materials used to build Gentlemen's carts seems on point, they have a MASSIVELY high failure rate from what I've heard.
Source Vapes

Some new ones that will be coming out soon that might be worth checking out are.
Divine Tribe

Just google some things, research as much as you can. There's a lot of bad products on the market that use unsafe materials. Don't buy anything if you don't think you can trust it. Feed your head, and question everything.

Tank leaked again

View Thread Reply
- Fri, 11 Mar 2016 09:05:54 EST kieOJsBi No.2133
File: 1457705154028.jpg -(1272405B / 1.21MB, 1601x1199) Thumbnail displayed, click image for full size. Tank leaked again
In a bid to find a decent alternative to smoking the one or two cigs I have a month I decided to buy the MVP 3.0 Pro. After a week or two the tank just leaks. I've set it up correctly and I had this exact problem with the MVP 2.0 Too.

I just want something that will fit on my MVP 3.0 and not leak. Also looking for UK CBD e-liuid vendors.

cheers lads
6 posts omitted. Click View Thread to read.
Charlotte Demblespear - Mon, 16 May 2016 03:31:16 EST M1Nt57rd No.2470 Reply
On a side note, if you screw tanks too tight, they leak. You have to let the rubber do its work.
Alice Nonningfuck - Mon, 16 May 2016 12:09:24 EST 6kJKS1HH No.2472 Reply
I have a suggestion, I won a Innokin iSub V in a giveaway recently, and it's the best damn tank I've ever used, no leaking whatsoever, and it uses all of Innokins iSub coils, which there's tons of choices, all temp control metals, standard coils, and claptons. It has a top fill, which has only leaked once, because I over filled it by a touch. The top fill system has a spring loaded chimney, which closes off the juice flow holes when you take the top off, then the holes open back when you put the top back on. And it's less messy to swap coils on this too. Just check out a Youtube video on it. As for it fitting, I believe it's 22 mm, it's small for a tank, only holds 3 ml. I have a Fuchai, and am using the SS coils on wattage mode, I keep it on about 35 Watts, the flavor and draw are phenomenal on this tank. I just have yet to get some titanium coils for it.....


View Thread Reply
- Sun, 15 May 2016 12:34:22 EST NtWdgegJ No.2467
File: 1463330062389.jpg -(20970B / 20.48KB, 402x406) Thumbnail displayed, click image for full size. 50w+
So I've had an eleaf 50w battery setup for a while now. I've been curious because it can go up to 50 watts, obviously. But why? I've never gone above 3.7v/8.7w

From my understanding the higher you jack up the power the quicker its going to torch your coils, cotton, and juice. Especially if you decrease the resistance of the coil?

Can somebody explain to me why you'd want 200 watts for a 0.2ohm coil? That seems completely ass backwards.
Nell Goodspear - Sun, 15 May 2016 13:42:54 EST 76OZ81C1 No.2468 Reply
200w is great to use when you have an actual mod that can use any sub-ohm tanks, hash head, ect.
No one vaping a Snow Wolf of anything like that is going to turn itup to 200w to smoke a regular vaping head, but rather to have the option to attach different heads.

Joyetech Cubis

View Thread Reply
- Thu, 07 Apr 2016 10:25:26 EST z3ul+q1C No.2278
File: 1460039126387.jpg -(20202B / 19.73KB, 600x600) Thumbnail displayed, click image for full size. Joyetech Cubis
I bought the Joyetech Cubis and I really liked the 0.5 Ohm coil because it was easy to hit and produced nice clouds.

On the opposite the 1 and 1.5 Ohm coils feel as if the air flow was blocked by something. Not a lot of smoke and very little taste.
I wanted to know if anyone experiences the same problem and if I could just open the coil, take out the tiny metal plate and hope it will be easier to hit?
4 posts omitted. Click View Thread to read.
Reuben Greenville - Sat, 16 Apr 2016 18:57:01 EST e0o/FsIz No.2332 Reply

I suggest you look for the notchcoil version of those coils.
David Favingwater - Sat, 07 May 2016 12:02:33 EST 2f8S9hrU No.2429 Reply
I went from a sub tank to a cubis. Cubis sucks, not enough air flow. I want cloudz yo. Picked up the geekvape avocado and I'm loving it, cubis is now backup
Eugene Fuckingbury - Sat, 14 May 2016 16:31:01 EST M1Nt57rd No.2462 Reply

Same here until I got the notch coils. Using the theorem rdta at home and the cubis on the road, both with the notch coils. The toptank got parked for now, I'm done with that leaking bastard.

Vaping Stigmas Outside the US

View Thread Reply
- Wed, 20 Apr 2016 16:20:39 EST wjRHRjIj No.2348
File: 1461183639579.jpg -(97769B / 95.48KB, 807x499) Thumbnail displayed, click image for full size. Vaping Stigmas Outside the US
I have to start off and say this might be blog post-y but I'll try my best to not let it be, and I'm sorry if it ends up being that way. Alright so...

Does anyone else feel uncomfortable vaping in public in countries/cities where vaping isn't well-known? I'm from the States, but I'm on an exchange program, studying at a city in The Netherlands. When I vape in public, people straight up STARE. I hate it. I have anxiety disorders, and it makes me feel terrible to be stared at by strangers.

In the States, when I was vaping in public places, only occasionally would I get stares from people. It was usually from older folks who (I guess?) had never seen someone vaporizing, and didn't know wtf you were doing. It was rare, though, and most often it would happen in smaller towns, where trends and outsider culture scenes were a few years behind the times. In moderately populated cities or in big cities, it's very very rare for anyone to look at you. Nobody cared, everyone had seen vaping before many many times, you were not a curiosity or a freak. You are just any other other person.

I would hazard a guess to say, in a town/city in the US of at least 60k people, if people are outside smoking, 1 in every 10 will be vaping. Pretty much all young people at the least will know what vaping is. They won't stare at you.

In the Netherlands, if 100 people are oustide smoking, 1 person will be vaporizing. I'd say less than that, even. Young people, old people, all people, stare when someone is vaping in public. People will just unashamedly stare. They'll turn their heads as they walk past. It's not like I'm vaping massive clouds, which would be attention seeking behavior. It would make sense to get stares then. I'm not doing that. I purposefully try to produce as little vapor as possible to keep a low profile. I take 1.5 second (or less) drags and hold it in. No joke, I've had people my age (early 20s), standing less than 20 meters from me, asking each other "WHAT is she doing?!" "what is that? "why is there so much smoke?" " and say "wow, look at her!" and then if one person knows what vaping is, they have a conversation about what vaping is while I'm standing right there, as if I can't hear them, like I'm a science experiment. Wtf am I supposed to do?? Go up to them and say "hi"? Give them a prepared speech on what vaping is? That's the last thing I ever want to do. I try to ignore them.

I fucking hate it. I just want to be able to get my nicotine without feeling like I'm an insect on display in a glass jar in a laboratory. I've taken up walking far away away from the university, to alleys or other places where people can't see me while I get my fix. I've considered switching back to cigarettes so I don't get any more people fucking staring at me. Does anyone know this feeling? I know you are supposed to not care what people think. That's one thing. But dealing with people staring at you, every time I step outside, that's something else. it drives me insane. What should I do?

I probably sound crazy, like I'm a delusional paranoid nutcase for caring that people stare. But it's not just in the Netherlands. And admittedly, in Amsterdam, vaping is fairly common so there's few stares there. But in other parts of Europe, I've noticed the same stigma in smaller towns in Italy and certain cities in the Czech Republic. In Germany and in Austria, I didn't get stares, it was basically like the US.

How do you guys deal with it? Does anyone have any advice what to do? Please help me.
10 posts and 3 images omitted. Click View Thread to read.
John Tootworth - Mon, 09 May 2016 21:10:35 EST 6TNj3VIS No.2441 Reply
super high amounts of nicotine is a lot less addictive than tobacco with chemical additives
Edwin Simmerham - Mon, 09 May 2016 23:28:08 EST dgmPWjCA No.2442 Reply

A % of school kids have been forever stealing their parent's cigarettes or getting a jump in. From like 10/11 there were kids in school trying it out and by 16 there were daily smokers and a always a few known hiding places for a smoke break during school hours.

Ultimately would rather these susceptible kids, who would smoke regardless, vaped 18mg all day everyday.

Thing is I reckon they just switch to cigs anyways, the embedded rebellion/cool factor just isn't there with a vape.

Not having a go at you, just felt like adding to the subject. Looking back on my time in school, it was weird. I started smoking cigs at 17 to condition my lungs into smoking spliffs. Lmao @ that logic amirite...
Albert Gasslesack - Thu, 12 May 2016 16:58:14 EST eppoU4VG No.2459 Reply
Remider that Trump is the most pro-vape candidate out of all of them.


Coils are Spoilz

View Thread Reply
- Tue, 10 May 2016 10:52:10 EST LOdCymyy No.2445
File: 1462891930609.jpg -(171776B / 167.75KB, 460x470) Thumbnail displayed, click image for full size. Coils are Spoilz
I soaked a nickel coil in vodka and then water. The metal is literally cracked, wtf is that all about? Love and peace.
Sidney Bardgold - Thu, 12 May 2016 04:30:47 EST VU6AIjxg No.2457 Reply
Nickel sucks just use kanthal

Nasty Taste everytime

View Thread Reply
- Sun, 08 May 2016 22:06:28 EST W8VLn6l4 No.2434
File: 1462759588731.jpg -(53086B / 51.84KB, 500x500) Thumbnail displayed, click image for full size. Nasty Taste everytime
So ever since yesturday everytime i vape i get this nasty metalic taste in my mouth . Ive tried new coils cleaning everything and changing even the e liquid but nothing helps. it the same nasty taste
1 posts omitted. Click View Thread to read.
Ebenezer Seddleman - Wed, 11 May 2016 15:21:04 EST J2m2vL70 No.2451 Reply
By priming I assume you mean drawing on the tank to saturate the coil before burning. Right?
Martin Pittbanks - Wed, 11 May 2016 22:41:09 EST 4kHripvR No.2454 Reply
Letting the juice soak into the coil for a decent amount of time as well as drawing on the tank without firing. Priming.
Sidney Bardgold - Thu, 12 May 2016 04:29:46 EST VU6AIjxg No.2456 Reply
Wash ur tank. Like every part dont just rinse out the middle, clean that whole thing out, then change coils n let em soak in the juice for a good half-hour or more. Also if ur using nichrome coils, or some titanium/nickel shit without a temperature control mod, well uhh dont, just stick with kanthal

best vape temps for raw opium and crack cocaine?

View Thread Reply
- Wed, 11 May 2016 03:27:12 EST pFybzdNi No.2449
File: 1462951632445.jpg -(95662B / 93.42KB, 735x512) Thumbnail displayed, click image for full size. best vape temps for raw opium and crack cocaine?
i have a volcano if that makes a diff

Vaping bad for teeth?

View Thread Reply
- Wed, 27 Apr 2016 10:16:18 EST IHXq+nph No.2382
File: 1461766578627.jpg -(724239B / 707.26KB, 1400x2776) Thumbnail displayed, click image for full size. Vaping bad for teeth?
Anyone know if vaping fucks your teeth?

Also, I vape after I brush my teeth at night
6 posts omitted. Click View Thread to read.
Eliza Seffingstock - Sat, 07 May 2016 23:06:02 EST PKk8cB6A No.2431 Reply
I thought vaping caused problems with teeth (but I was just drinking a lot of tea, no wonder britfags have terrible teeth).

I haven't noticed any problems really; dry mouth might be a thing. If you're /hooch/, it kind of compounds and you wake up with terrible cotton mouth, which is horrible for your teeth.
Eliza Seffingstock - Sat, 07 May 2016 23:06:46 EST PKk8cB6A No.2432 Reply

Also, I've been vaping for about 4 years now. nb
Cornelius Drushwerk - Tue, 10 May 2016 14:55:41 EST UNtBfuUM No.2446 Reply
honostly OP I havent been having problems
As a matter of fact, when I quit smoking and started vaping, plus flossing and brushing twice a day for 2 minutes, I noticed a serious whitening in my teeth by the second month of quitting. So personally I havent had any problems.


View Thread Reply
- Thu, 05 May 2016 19:02:15 EST AWSYBjcX No.2420
File: 1462489335254.jpg -(48115B / 46.99KB, 480x320) Thumbnail displayed, click image for full size. Cleaning
How often do you really have to clean portable vapes? It seems unrealistic to me that people clean this stuff out once a week.
Quetzalcoatl !KDjYWIiOiM - Sun, 08 May 2016 04:19:34 EST QBnByFaF No.2433 Reply
crafty and mighty get so dirty because of the way the top part of the unit is shaped, to give a lot of surface area and movement of the vapor so it cools down a bit at the end. i usually clean my vape stems every few weeks. thats about all the cleaning i do on my Solo lol.
Edwin Pickhood - Tue, 10 May 2016 01:32:01 EST ru6Xaj7/ No.2443 Reply
Cleaning is pretty easy so it's expected you do it often. Just soak a pipe cleaner with some iso, then rinse thoroughly. The more you do it the easier it'll be. I suggest doing it while your charge your device.

Some devices are easier to clean than others, and how badly a unit needs a cleaning varies greatly. For example, the launch box is very easy t
Edwin Pickhood - Tue, 10 May 2016 01:36:31 EST ru6Xaj7/ No.2444 Reply
oops, sorry about that

*For example, the launch box is very easy to clean but it's expected that you do a small level of cleaning (just brushing out the trench with an included small brush) every time you load it. Other units, like the Pax 2, do better with regular cleanings but can go a long time without them.

It really depends on your unit OP but most require pretty regular cleaning. I clean my Pax every two or three weeks and my Launch Box (which is my daily driver) once every 3 months or so, because it doesn't really need to be cleaned ever (cleaning in this case is for aesthetics, keeping the trench from getting too dark). I suggest searching for stuff about cleaning on the Fuck Combustion threads.

Fun fact: it's not a portable but from what I've read the Volcano requires no cleaning at all, and users say they don't clean it for years and it works and looks like new!

Cloutank and iTaste MVP 2.0

View Thread Reply
- Sat, 19 Mar 2016 15:41:50 EST ffoF88E6 No.2181
File: 1458416510642.jpg -(6829B / 6.67KB, 225x225) Thumbnail displayed, click image for full size. Cloutank and iTaste MVP 2.0
I recently moved and didn't want to bring my cheap atomizer I use for shatter on a plane. The shops near my home don't have much for atomizers for shatter but I have hear good things about the cloutank.

Does anyone have any experience with the Cloutank and the itaste mvp 2.0? And if so would you recommend it?
Eugene Wisslesud - Thu, 21 Apr 2016 00:38:59 EST PY5+wXDH No.2351 Reply
A friend of mine has one, from day 1 it has the taste of the heating coils. Its pretty terrible I think personally.
Augustus Wushwell - Mon, 09 May 2016 07:15:03 EST fd0gqGh9 No.2439 Reply
Fucking you best hit that lil nigga on six watts max

I had the m3, and the m4; the m4 is far superior and easy to clean....but they -do- smell.....the coil does glow.


View Thread Reply
- Wed, 04 May 2016 15:00:40 EST yP+TY27+ No.2416
File: 1462388440129.jpg -(7797B / 7.61KB, 225x225) Thumbnail displayed, click image for full size. CLIQUID
JWH-210 or MMB-CHMINACA) for PG vaping? I'm looking for a new noid to vape in my e-cig

Anyone tried either of them, or PG vaped another noid?
Nicholas Humbledale - Wed, 04 May 2016 17:26:32 EST duEl3ChU No.2417 Reply
1462397192999.jpg -(18146B / 17.72KB, 420x317) Thumbnail displayed, click image for full size.
Phyllis Fommerspear - Fri, 06 May 2016 07:44:37 EST 23ofMe9P No.2424 Reply
Huh? I thought I replied to this already with my 2 cents, i think I forgot to hit post:

I just stick to the Pure MMB-CHMINACA. Vaped straight of foil.

I constantly find myself waking up on the floor. It's like a heroin/weed hybrid. Gets one super /other/ed out. Keeping an ecig cartridge of hashoil around is good too, like real hashoil, to help offset any potential ill effects. Pure powder is easier for me to dose bevause I can actually SEE how much I', doing rather than trusting that a solution, or herb blend doesnt have any hot spots that might fucking KILL ME

Report Post
Please be descriptive with report notes,
this helps staff resolve issues quicker.